View B82494A_4147189.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SMT inductors
SIMID series, SIMID 1008-A
Series/Type: Date: B82494A March 2008
Data Sheet
EPCOS AG 2008. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS' prior express consent is prohibited.
SMT inductors, SIMID series SIMID 1008-A
Size 1008 (EIA) or 2520 (IEC) Rated inductance 0.010 H to 100 H Rated current 60 mA to 280 mA Construction
Ferrite core Molded epoxy encapsulation
B82494A
Features

High Q factor High resonance frequency Suitable for reflow soldering Non-automotive RoHS-compatible
Applications
Filtering of supply voltages, coupling, decoupling Antenna systems Telecommunications
Terminals
Base material phosphor bronze Layer composition SnCu (lead-free) Electro-plated
Marking
Marking on component:
L value (in H)
Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing unit
8-mm blister tape, wound on 180-mm reel Packing unit: 2000 pcs./reel
Please read Cautions and warnings and Important notes at the end of this document.
2
03/08
SMT inductors, SIMID series SIMID 1008-A
Dimensional drawing and layout recommendation
0.40.2 1)
1.20.11)
B82494A
B
C D
B
IND0053-6
1.60.2
A
_ 0.2 2.5 +0.3
B 1.05
A
C 1.5
D 3.5
1.6
Marking
20.2
1) Soldering area
IND0543-T-E
Dimensions in mm
Taping and packing Blister tape
_0 1.5 +0.1
Reel
1.750.1
40.1
130.5
3.50.05
Component
20.05
80.3
40.1 Direction of unreeling
IND0595-W-E
9.00.3 o600.5
IND0591-M
Dimensions in mm
Please read Cautions and warnings and Important notes at the end of this document.
3
03/08
1782
SMT inductors, SIMID series SIMID 1008-A
Technical data and measuring conditions Rated inductance LR Q factor Qmin Rated temperature TR Rated current IR
B82494A
Measured with impedance analyzer Agilent 4191A at frequency fL, 0.1 V, 20 C Measured with impedance analyzer Agilent 4191A at frequency fQ, 20 C 85 C Maximum permissible DC with inductance decrease L/L0 10% and temperature increase of 20 K at rated temperature Measured at 20 C Sn95.5Ag3.8Cu0.7: (245 5) C, (5 0.3) s Wetting of soldering area 90% (based on IEC 60068-2-58) 260 C, 10 s (based on IEC 60068-2-58) 55/085/56 (to IEC 60068-1) Mounted: -55 C ... +85 C Packaged: -25 C ... +40 C, 75% RH Approx. 21 mg
Self-resonance frequency fres,min Measured with network analyzer Agilent 8753D, 20 C DC resistance Rmax Solderability (lead-free)
Resistance to soldering heat Climatic category Storage conditions Weight
Characteristics and ordering codes LR H 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 10%
^
Tolerance K
Qmin 10 10 10 10 15 15 15 15 15 15 15 15 10 10 10
f L; f Q MHz 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2
IR mA 280 270 255 250 240 230 220 215 205 200 190 185 175 170 160
Rmax 0.32 0.34 0.38 0.40 0.43 0.47 0.51 0.55 0.59 0.63 0.68 0.73 0.80 0.87 0.98
fres,min MHz 2500 2200 1800 1550 1350 1150 1000 890 770 670 590 520 460 400 340
Ordering code B82494A1100K000 B82494A1120K000 B82494A1150K000 B82494A1180K000 B82494A1220K000 B82494A1270K000 B82494A1330K000 B82494A1390K000 B82494A1470K000 B82494A1560K000 B82494A1680K000 B82494A1820K000 B82494A1101K000 B82494A1121K000 B82494A1151K000
Please read Cautions and warnings and Important notes at the end of this document.
4
03/08
SMT inductors, SIMID series SIMID 1008-A
Characteristics and ordering codes LR H 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 10%
^
B82494A
Tolerance K
Qmin 10 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 15
f L; f Q MHz 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796
IR mA 155 190 180 170 160 155 150 140 130 195 180 170 160 155 145 135 130 125 120 115 105 80 75 70 65 60 115 110 90 80 75 70 65 60
Rmax 1.05 0.70 0.75 0.85 0.95 1.00 1.10 1.25 1.40 0.65 0.75 0.85 0.95 1.05 1.20 1.30 1.40 1.55 1.75 1.95 2.2 3.5 3.8 4.4 5.0 5.8 6.3 7.1 9.5 11.0 12.1 16.6 19.0 21.0
fres,min MHz 300 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 32 30 28 25 22 21 20 18 17 16 15 13 12
Ordering code B82494A1181K000 B82494A1221K000 B82494A1271K000 B82494A1331K000 B82494A1391K000 B82494A1471K000 B82494A1561K000 B82494A1681K000 B82494A1821K000 B82494A1102K000 B82494A1122K000 B82494A1152K000 B82494A1182K000 B82494A1222K000 B82494A1272K000 B82494A1332K000 B82494A1392K000 B82494A1472K000 B82494A1562K000 B82494A1682K000 B82494A1822K000 B82494A1103K000 B82494A1123K000 B82494A1153K000 B82494A1183K000 B82494A1223K000 B82494A1273K000 B82494A1333K000 B82494A1393K000 B82494A1473K000 B82494A1563K000 B82494A1683K000 B82494A1823K000 B82494A1104K000
Please read Cautions and warnings and Important notes at the end of this document.
5
03/08
Cautions and warnings
Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets. - Particular attention should be paid to the derating curves given there. - The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation.
The following points must be observed if the components are potted in customer applications:
- Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. - It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. - The effect of the potting material can change the high-frequency behaviour of the components.
Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and Important notes at the end of this document.
6
03/08
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 7 03/08

▲Up To Search▲

Price & Availability of B82494A

	To Download B82494A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .